[ 中文版 ]
[ ENGLISH ]
 
HOME ABOUT PRODUCT CASE PROCESS MARKET MESSAGE   JOB   CONTACT
 
 
 
 
Mold
Tools
Model
Example
LINKS
贸易之窗网
hp
mail.live
mail.yahoo
cbssports
yahoo
NO PIC!
Shanghai Yonggungsa Lake Trading Company
  PROCESS
01.Concrete paving in accordance with plan provisions and before the elevation of formwork. Sidewalk concrete to 50mm above the grass-roots level, the grass-roots level carriageway concrete for more than 80mm;
02.Spreads paving the standard tong. The recommendation mixture ratio is: 32.5 cement 424KG, coarse sand 400KG, fine sand 400KG, gravel (melon seed piece) 1100KG, water 185-195KG ;
03.After carrying on the plate vibrator overlapping vibration, raises below alternately thick liquid .100mm with the iron roll tong the use plate vibrator work, above 100mm tong the use jack-in type inspires pounds the work ;
04.After copying the flat scale carries on levels carries on weeping processing, will use the manual sheet iron before the superficial prehardening tong superficially attractive even ;
05.Standard amount used (3kg/m2) 1/3-1/2((1-1.5KG)) colored strengthening material even spread in prehardening stage concretes surface ;
06.After treating the colored strengthened material shade wet, carries on with the manual sheet iron or the big trowel first time levels receives the light, do not shovel excessively wipes the coagulation mantle of soil, like this will cause the superficial water leakage and weakens the color ;
07.Will be left over the colored strengthened material makes up scatters has not scattered the uniform place in the first time, after treating the shade wet, second time receives the light ;
08.After branch strength especially colored strengthening material prehardening, in the skin drying not obvious moisture's situation, after broadcasting ads-lib the strength to color especially the drawing of patterns powder (standard amount used is 0.15kg/m2), the die. When die must make an effort should even consistent, maintains the mold fixed smooth, suppresses the design to take a formation, cannot repeatedly the stamping ;
09.Treats the branch strength special die grounds around a house completely dry coagulation formation at least 3-7 days later, carries on the trimming and expansion joint cutting, when the kerf strips with water promptly when the kerf produces cement mortar ;
10.The water used or the detergent clean surface, washes and rubs clear brushes the surface certainly to guarantee that the entire grounds around a house clean degree is consistent, will otherwise cause the ground color depth to vary ;
11.After flushing grounds around a house skin drying, the coating branch strength dissolves the base concretes aquaseal especially. Causes the die grounds around a house surface against pollution non-skid property to strengthen once more. After completing the hardened die grounds around a house besides the very good cosmetic, its physical property are also stable ;
12.After branch strength special die grounds around a house coating dissolves the base concretes end product effect
 
Copy Right @ 2009 Color Incused Concrete Hardener,Color Incused Release Agent,Printed Die,Art Street,Texture printed on the ground 
Address:JiaSong Shanghai Qingpu Industrial Park Road No. 4877  Post:201705
Tel:+86-21-59177323 / 15921141988  Fax:+86-21-59143068  WebSite:http://www.quality51.com  
Technical Advisory:点击这里给我发消息
Customer   Service:点击这里给我发消息